Welcome!
Showing posts with label restyle. Show all posts
Showing posts with label restyle. Show all posts
Black and White Chair
by Kim
Been doing a little painting this week. I have a stack of old chairs in the garage calling to me. I painted two in this black and white motif. My inspiration came from the fabric, which I got at Jo-Ann's with a 50% off coupon! It also came in turquoise which was so gorgeous...
I started these chairs a bit differently than I always do. I spray painted them white. It took three cans (bought with coupons!). I always paint the entire chair with craft acrylics because it is so inexpensive that way. But, this week, I was interested in not spending so much time working on them. I think the less time I work on a big project that I sell, the more money I make on it. And that is the point.
I sprayed them flat because I knew I would spray a glossy sealer over all. And, did you know that flat spray costs less than satin or gloss? That was a new one on me, and I like it.
Then I painted the details with craft acrylics as I normally do.
These go perfectly in my kitchen. However, there is not one square inch of open space in my kitchen, so I am taking them to The Loft in Bay City to see if she will sell them for me.
If they don't sell, I might have to bring them back to the kitchen and replace the less exciting chairs that are there now.
Love a good restyling project.
Use your Vitamin C!
I started these chairs a bit differently than I always do. I spray painted them white. It took three cans (bought with coupons!). I always paint the entire chair with craft acrylics because it is so inexpensive that way. But, this week, I was interested in not spending so much time working on them. I think the less time I work on a big project that I sell, the more money I make on it. And that is the point.
I sprayed them flat because I knew I would spray a glossy sealer over all. And, did you know that flat spray costs less than satin or gloss? That was a new one on me, and I like it.
Then I painted the details with craft acrylics as I normally do.
If they don't sell, I might have to bring them back to the kitchen and replace the less exciting chairs that are there now.
Love a good restyling project.
Use your Vitamin C!
Labels:
furniture,
painting,
recycled craft,
restyle
Button Jacket Lapel
by Kim
At CHA this week, I will be selling buttons, so I really wanted to sell buttons!
It was a fun project. Watching a movie while sewing buttons on was relaxing.
After a trip to the Salvation Army store, where I bought a jacket for $8, I stitched one lapel full of buttons, both antique gold and antique silver. I used shiny metallic embroidery floss (gold, black, and copper). I cannot tell a lie. That stuff made me say a few bad words inside my head. It is more prone to knotting than cotton floss. But, the little bit of shine it added was worth it. It makes me want to touch it every time I look at it. Texture and shine!
When you go to buy that shiny floss, take a coupon!
Then, I added gathered brown tulle along the entire lapel/collar. The tulle was left over from lamp tutus. It is on a roll, 8" wide. I folded the width in half and made running stitches along the fold. After I pulled the thread to gather slightly, I tacked it to the underside of the lapel/collar. It is exactly the same process I show in my lamp post, except I stitched instead of glued.
Now, I love the buttons and am unsure about the lapel tutu. What do you think?
Love that Vitamin B(uttons)!!!

http://whipperberry.com/2012/02/friday-flair-link-party-12.htmlhttp://simplydesigning.blogspot.com/2012/02/simply-link-party_10.html
Labels:
Blumenthal Lansing,
buttons,
recycled craft,
restyle,
wearable art
Recycled Frame/Magnet Board
by Kim
Here is another thrift store purchase. It was half price, so it cost $7. I had all of the other components at home.
Here is how I made it:
1. Take the frame apart. Spray paint the frame hot pink.
2. Use the cardboard photo backing. Paint 2-3 coats of magnet paint to cover the board. letting each coat dry in between. On top of that, paint the acrylic color you want to show. Mine is lime green. Let that dry.
3. Make a border of zebra print duct tape.
4. Put the board back into the frame. Hot glue it in place if it doesn't have little prongs that hold it in.
5. Hot glue big silk daisies onto magnets.
My frame already had a sawtooth hanger on it, so it was ready to go. Cute for $7!
Use your Vitamin C!
Labels:
craft,
dorm decorating,
duct tape,
home dec,
recycled craft,
restyle
Restyled Lamp
by Kim
I am having the most fun in the studio right now working on requests from Niece 1 and Niece 3 for their dorm rooms! Niece 3 will have as much in her dorm room as I have in my house. When I went to college...in the stone age, I took my clothes. The end. Her room is going to be a reflection of her. Or my studio. Some handmade touches will make it feel homey.
These fancy lamps are popping up everywhere with price tags starting at $50 for small side lamps. Don't get the checkbook out yet. They are easy to make yourself, for much less money. Niece 3 now has this turquoise and black lamp in her dorm room at the University of Michigan.
I got this lamp, complete with shade and bulb at the Salvation Army Thrift Store for $9.99. And, it works. But, no plain lamps for us!
This is a good beginner project. You need the lampshade, a piece of fabric big enough to cover it, Mod Podge (I used the matte finish, but it also comes in gloss and sparkle), a paintbrush, a pair of scissors, a hot glue gun, and a craft boa. You can add acrylic paint like I did, but it is not a deal breaker. Maybe you have some pretty fabric that needs no extra decorating.
Work with the shade sitting on the lamp. Brush Mod Podge on the shade. Work a section at a time, making sure you leave no dry spots. Place the fabric over the wet Mod Podge. Smooth the fabric out with the brush until it is smooth. Keep working, adding Mod Podge and the fabric over it until the shade is covered.
Using scissors, trim the fabric around the top and bottom edges and the final fabric edge on the shade.
Then, to make the lamp easier to dust later, brush a coat of Mod Podge to cover the shade. Let it dry completely.
I added big black dots made with black acrylic paint and a large Spouncer. A Spouncer is a round sponge on a handle. Any craft store worth its salt carries them in 3 sizes. They make painting dots fast and easy.
This black feather boa was in my craft cupboard. Deep in the cupboard. SO deep, it looked like it had been dead for 10 years. It was squished and scrawny. A few minutes in the dryer fluffed it right out. I hot glued it around the base of the shade. Do you know you can buy feather boas in many colors at the craft store? They are inexpensive too.
TIP: Don't glue the boa around the top of the lamp. It gets pretty hot when the lamp is on for awhile. You don't want your lamp to be a fire hazard.
I did not have to paint the base because it was in good shape. So, for minimal work and $, Niece 3 has a one-of-a-kind lamp for her room. I hope she hates it and gives it back!
Restyle with your Vitamin C!




These fancy lamps are popping up everywhere with price tags starting at $50 for small side lamps. Don't get the checkbook out yet. They are easy to make yourself, for much less money. Niece 3 now has this turquoise and black lamp in her dorm room at the University of Michigan.
I got this lamp, complete with shade and bulb at the Salvation Army Thrift Store for $9.99. And, it works. But, no plain lamps for us!
This is a good beginner project. You need the lampshade, a piece of fabric big enough to cover it, Mod Podge (I used the matte finish, but it also comes in gloss and sparkle), a paintbrush, a pair of scissors, a hot glue gun, and a craft boa. You can add acrylic paint like I did, but it is not a deal breaker. Maybe you have some pretty fabric that needs no extra decorating.
Work with the shade sitting on the lamp. Brush Mod Podge on the shade. Work a section at a time, making sure you leave no dry spots. Place the fabric over the wet Mod Podge. Smooth the fabric out with the brush until it is smooth. Keep working, adding Mod Podge and the fabric over it until the shade is covered.
Using scissors, trim the fabric around the top and bottom edges and the final fabric edge on the shade.
Then, to make the lamp easier to dust later, brush a coat of Mod Podge to cover the shade. Let it dry completely.
I added big black dots made with black acrylic paint and a large Spouncer. A Spouncer is a round sponge on a handle. Any craft store worth its salt carries them in 3 sizes. They make painting dots fast and easy.
This black feather boa was in my craft cupboard. Deep in the cupboard. SO deep, it looked like it had been dead for 10 years. It was squished and scrawny. A few minutes in the dryer fluffed it right out. I hot glued it around the base of the shade. Do you know you can buy feather boas in many colors at the craft store? They are inexpensive too.
TIP: Don't glue the boa around the top of the lamp. It gets pretty hot when the lamp is on for awhile. You don't want your lamp to be a fire hazard.
I did not have to paint the base because it was in good shape. So, for minimal work and $, Niece 3 has a one-of-a-kind lamp for her room. I hope she hates it and gives it back!
Restyle with your Vitamin C!




Labels:
dorm decorating,
home dec,
lighting,
restyle
Embellished Bag
by Kim
The Human Pinball gave me this bag a couple years ago. I have nearly worn it out. I love it. What is not to love? Deep turquoise patent leather!
Here is its original incarnation.
And sad, oh sad, what has happened to the straps.
I thought about it awhile. This piece of fabric was the answer.
Here is what you do:
1. Tear strips of the length of the fabric about 1 1/2" wide. 2. Knot one end of a strip around the base of one handle/strap. Leave a 4-5" tail of fabric. Tightly wrap strip around handle. Put a piece of double stick tape on the handle every couple inches to help keep the fabric strips from shifting.
3. Knot the end of the fabric strip at the final end of the handle. Trim the tail to the same length as the first end. Repeat for second handle.
4. Add some beads and charms! Crimp one end of beading wire. String beads. Wrap wire around base of handle. Crimp again, and trim excess wire.
Make 3-5 bead dangles using beads and maybe some charms on the ends of the wires. I am loving my disco ball charm.
Here it is, all ready for another couple years of life.
Take your Vitamin C!


Labels:
beads,
recycled craft,
restyle
Subscribe to:
Posts (Atom)
Visitors
Contact Me:
kballor@aol.com








